Parkside PSHL 2 A1 Traduction Du Mode D'emploi D'origine page 9

Improper use can result in
„ z
injuries to the user and other
types of illnesses.
Please examine the filter prior
„ z
to each use. As soon as the
function and appearance seem
defective, they must no longer
be used.
The use of the welding helmet
„ z
is prohibited if the filter flickers
or if the level of darkening no
longer corresponds to the
standard value or there are
other abnormal working
conditions.
Please do not expose this
„ z
product to unnecessary solar
radiation.
Please only use original spare
„ z
parts. The use of non-original
parts can cause problems with
regard to the protective func-
tion, serviceability and degree
of product protection.
Exceeding the service life
„ z
(insufficient protection) – please
check the protective glasses
prior to each use for damage
and durability.
Using eye protection without
„ z
the filter effect against radiation
(damages the eyes) – prior to
each use check whether the
eye protection exhibits the
necessary scale number.
Using the product against
„ z
splashes (insufficient protection) –
always check whether the
correct protective effect is
present.
Using the product against large
„ z
dust particles (injury, accident).
The eye protection equipment
must only be used for the work
described in the operating
instructions. Any deviation from
the instructions in the operating
instructions can result in injuries
or accidents.
Using damaged products
„ z
(insufficient protection) –
prior to each use check the
protective glasses for damage
and durability.
Improper use of the eye protec-
„ z
tion (injury, accident). The eye
protection device must only be
used for the work described
in the operating instructions.
Any deviation from the instruc-
tions can result in injuries or
accidents.
This device may be used by
„ z
children aged 16 years and up,
as well as by persons with
reduced physical, sensory or
mental capacities, or lacking
experience and / or knowledge,
so long as they are supervised
or instructed in the safe use
Safety instructions
GB/IE/NI 9