Service; Label Meanings - Parkside PSHL 2 A1 Traduction Du Mode D'emploi D'origine

Service

z z
Only use original accessory parts:
Black variant
(PSHL 2 A1, Item no.:2150):
• Viewing pane (CMC 1B CE):
110.8 mm x 90 mm x 1.0 mm
• Rear lens (CMC 1F CE):
98.6 mm x 46 mm x 0.8 mm
Variant with flames
(PSHL 2 A1, Item no.:2151):
• Viewing pane (CMC 1B CE):
109.6 mm x 86 mm x 1.0 mm
• Rear lens (CMC 1F CE):
98.6 mm x 46 mm x 0.8 mm
How to contact us:
GB, IE, NI
Name: C.M.C. Creative Marketing
& Consulting GmbH
Website: www.cmc-creative.de
E-mail: service.gb@cmc-creative.de
Phone: 0-808-189-0652
Registered office: Germany
IAN 308893
Please note that the following address is not
a service address. Please first contact the
service point named above.
Address:
C.M.C. Creative Marketing & Consulting
GmbH
Katharina-Loth-Str. 15
DE-66386 St. Ingbert
DEUTSCHLAND
Ordering spare parts:
www.lidl.com/contact-us
Warranty and service information / Label meanings
z Label meanings
Safety viewing panels approved
according to DIN EN 166
(C5211CMC, C5212CMC):
• Viewing pane: CMC 1 B CE
CMC = manufacturer code
1 = optical class
B = mechanical strength
CE = CE symbol)
• Rear pane: CMC 1 F CE
CMC = manufacturer code
1 = optical class
F = mechanical strength
CE = CE symbol)
ADF approved according to
DIN EN 379: 4/9-13 CMC
1/1/1/2/379 CE (C5794CMC)
Legend:
4 = bright state
9–13 = dark state
CMC = manufacturer code
number 1 = optical class
number 2 = scattered light grade
number 3 = homo-geneity class
number 4 = angle dependency class
379 = test standard
CE = CE symbol
Welding helmet case:
CMC EN 175 F CE
(C5799CMC, C5800CMC):
Manufacturer identification:
Number of the standard:
Area(s) of application (if required): S, F, B
Mass in grams (if required)
IP rating for welding helmet, order no.:
2150/2151: F
CE = CE symbol
(medium-energy impact at 120 m/s)
(low-energy impact at 45 m/s)
GB/IE/NI
CMC
EN 175
15