Automatic Switching Of Weighing Range; Switching Off The Scale - Seca 645 Mode D'emploi Et Garantie

Automatic switching of
weighing range

Switching off the scale

4. Press and hold the Enter key (send/print) of the
scale.
The measured value is sent to the wireless printer.
BMI is calculated.
Height, weight and BMI are printed out.
The scale has two weighing ranges. In weighing range
1 ( ), capacity is reduced, but the increments in the
weight display are finer. In weighing range 2 (
can use the maximum capacity of the scale.
After the scale is switched on, weighing range 1 is
active. If a particular weight is exceeded, the scale
automatically switches to weighing range 2.
To switch back to weighing range 1, proceed as
follows.
Completely remove the load from the scale.
Weighing range 1 is active again.
Press the Start key.
NOTE
When in battery mode, the scale will switch off
automatically after a short period if no load is
placed on it.
English
), you
Operation • 95