Removing The Standard Control Elements - DT SWISS ODL Mode D'emploi

3.2 Removing the Standard Control Elements

1. Hold the compression wheel and unscrew the fix-
ing screw anti-clockwise using a T8 Torx key.
2. Remove the compression wheel and the fixing
screw.
3. Unscrew the fixing nut of the lever anti-clockwise
using a 8 mm socket wrench.
4. Remove the lever, the nut, the o-ring and the
index.
5. Remove the three index pins and the four springs
using forceps (or s.th. similar).
O.D.L. Forks Remote Transformation V2014.07
DE
EN
FR
IT
ES
NL
PT
ZH
11