Solo 142 Instructions D'emploi page 22

Preface
Dear Customer,
Congratulations for choosing this SOLO quality
product.
The Models 142 and 154 brushcutters with
newly developed high performance engines, are
designed for professional use. Its professional design
makes assembly and use easy.
The proven technology used in the Nikasil-
coated, vertical cylinder 2 cycle engine guarantees
high performance and low fuel consumption.
The easy-start Primer system assures quick,
reliable start-up. The straight shaft with a reinforced
shaft tube, dampens vibration by means of special-
elastomer isolator. The multifunction grip with half-
throttle lock, throttle lever and stop switch, as well
as the easily accessible air filter, allow for easy
servicing and low fatigue operation.Prior to
operating the unit, please read the owner's manual
carefully, and most importantly, observe all safety
rules.
In order to maintain the performance of the
brushcutter, it is necessary to carefully follow the
service instructions.
Your dealer will be glad to assist you with any
questions.
CE Declaration of conformity
In accordance with EG Directives 98/37/EC, 2000/14/EC and
89/336/EEC (amended by 92/31/EEC), SOLO Kleinmotoren
GmbH, Stuttgarter Strasse 41, D-71069 Sindelfingen, being
solely responsible, states that the product referred to in
this declaration complies with the requirements of the
Machinery Directive.
Sound power level (DIN45635)
Guaranteed sound
Actual sound
Applied standards:
Conformity assessment procedures
This declaration of conformity loses its validity, if the
equipment is converted or modified without the
manufacturer's consent.
Sindelfingen,
1 January 2005
st
SOLO Kleinmotoren GmbH
ENGLISH 2
142 154
112 112 dB(A)
111 111 dB(A)
EN 11806
Appendix V
Wolfgang Emmerich
Executive Director
Symbols
The following symbols are used in this manual and
on the product:
Thoroughly read these operating
instructions before undertaking any
maintenance, installation and cleaning
steps
Wear ear defenders and a face shield
before starting the engine
Wear protective gloves when handling
and working with the equipment
Wear solid shoes, preferably safety
shoes with a good tread
Always handle this power tool with
particular care
Maintain a minimum distance
of 15 metres bystanders
Please note: objects may be thrown out
and high
Please note: power tool may kick back
on contact with a solid object
Never exceed the specified
maximum speed
Never smoke near the power tool or
where the equipment is refuelled!
Keep open flames away from the
power tool and the fuel can
- This equipment produces exhaust
fumes
and
- fuel vapours are poisonous;
never start or refuel in enclosed spaces