Filling Solution Tank - Nobles Speed Scrub 2701 Opérateur Manuel Et Liste Des Piéces

OPERATION
3. Make sure to connect the supply hose onto the
hose storing plug when not in use (Figure 13).
This will prevent the FaST solution system from
drying out and clogging up the supply hose.
4. The FaST solution system MUST be primed for
first time use. To prime system, make sure the
solution tank is empty and operate the machine in
the FaST Scrub Mode for 3 minutes (See
MACHINE OPERATION). This step is only
required for first time FaST system use.

FILLING SOLUTION TANK

ATTENTION: For Models equipped with the FaST
Option. USE CLEAR COOL WATER ONLY. DO NOT
add cleaning agents in solution tank. Conventional
cleaning agents/restorers may cause failure to the
FaST solution system.
1. Transport machine to filling station. Raise
squeegee and brush when transporting.
2. Turn off machine.
FOR SAFETY: Before leaving or servicing
machine, stop on level surface and turn off
machine.
10
FIG. 12
FIG. 13
Home Find... Go To..
3. Shut off solution flow. Pull solution flow lever
completely back to shut off (Figure 14).
FIG. 14
4. Open solution fill door at front of machine and fill
solution tank with clean water, 60°C (140°F)
maximum temperature. Or you can fill solution
tank using hose fill port at rear of machine. Pull off
plug and insert hose to fill. The clear tube below
the fill port has 19L (5 gallon) increment markers
to indicate amount of water in tank (Figure 15).
NOTE: The water must not be hotter than 60_C
(140_F) or tank damage may occur.
FIG. 15
NOTE: If filling with a bucket be certain that bucket is
clean. This will prevent possible solution line clogs.
5. FOR CONVENTIONAL SCRUBBING: Pour a
recommended cleaning detergent into the solution
tank according to mixing instructions on the bottle.
ATTENTION: For Conventional Scrubbing, only
use recommended cleaning detergents. Machine
damage due to improper detergent usage will void
the manufacturer's warranty.
WARNING: Fire or Explosion Hazard.
Never Use Flammable Liquids.
FOR SAFETY: When using machine, follow mixing
and handling instructions on chemical containers.
Speed Scrub 2701/3301 (07- -04)