Spypoint TINY-3 Manuel D'utilisation page 6

10
Connector
Lithium battery pack
This SPYPOINT ® camera can be powered by a rechargeable
lithium battery LIT-09/LIT-C-8 (sold separately, refer to
the section "Options"). This type of battery is less affected
by cold temperatures and lasts up to 3 times more than an
alkaline battery. During the installation of the lithium battery,
place the switch inside the battery case to "RECH". Insert
the battery in the case as indicated and insert it inside the
camera (see figure below)
Connector
SPY SPY
Top
Connector
Top
Connector
P P INT INT
TM
TO INSERT THE BATTERY CASE INSIDE
THE CAMERA
Connector
SPY SPY P P
External (12V)
The camera can also be powered from an external 12-volt
DC input such as a 12-volt battery (KIT-12V/BATT-12V, sold
separately) or a 12-volt adapter (AD-12V, sold separately).
During the installation of 12-volt battery, place the switch
inside the battery case to "ALK" (i.e. alkaline).
with a lithium battery pack, slide the switch to "RECH".
To find the accessories available for the 12-volt, refer to the
section "Options".
TINY-3
Connector
INT INT
TM
If combined
11