Spypoint TINY-3 Manuel D'utilisation page 12

22
Choose "Electricity" if the camera is
powered by a main electric supply. (using
a 12-volt DC adapter AD-12V, sold
separately). Main electric power supply
is recommended when use for security
purposes. It provides an instant trigger time
when a movement is detected. When the
power supply is used the lithium battery
pack or the AA batteries can remain safely
inside the camera and it is ideal in case of
a blackout. A 12-volt DC adapter that can
provide a minimum of 800 mA is required
(See "Options" for accessories).
Note: When using the electricity power, the
"Multi-shot" mode and the "Delay" between
photos are disabled as the camera triggers
instantly every time it detects motion. Also,
the printing of the temperature on each
picture is disabled.
Allow the user to choose how many LEDs
Infrared:
(On/One LED/
will be turned on.
Off)
On: Every LEDs work when taking photos
or videos at night.
One LED: Only a single LED works (see
figure). This option can be useful when
using an IR-Booster/Black LEDs IR-
Booster (sold separately, refer to the section
"Options").
Off: LEDs are deactivated so your night
photos or videos are pitch black.
23
LED for
infrared
sensor
TINY-3