External Triggering - Spypoint TINY-3 Manuel D'utilisation

26
MS-1 The MS-1 motion sensor is required
(Remos ):
(sold separately, see "Options"). Allows the
TM
(On/Off)
camera to be triggered wirelessly by one or
more MS-1 devices.
Allows the camera to trigger, up to a distance
IR-Booster
(Remos ): of 50 ft, one or more remote IR-BOOSTER
TM
(On/Off)
infrared lighting devices without the use of
an additional transmitter.
REPORT
The report mode keeps a record of the last period of
use of the camera. The beginning date corresponds
with the moment the camera is set to either "Photo" or
"Video" mode. Thus, the report is reset when changing
modes.
1.
2.
3.
4.
5.
6.
7.
8.
9.
1. Beginning and end date of the report
2. Number of photos or videos taken during the day
3. Number of photos or videos taken at night
4. Total of photos or videos taken
5. Current time of the camera
6. Current date of the camera
7. Battery level (1/4 = low, 4/4 = full)
8. Remaining space on the SD card estimated by a number
of photos
9. Used space on the SD card (total number of files, only
includes photos and videos taken by a SPYPOINT

EXTERNAL TRIGGERING

Input which triggers the taking of photos or videos using a
normally open contact. (Example: using a magnetic door
switch connected to an alarm system).
DOWNLOAD TO A COMPUTER
To transfer or view photos and videos on a PC, you must first
turn off the camera and connect the USB cable (supplied)
from the camera to your computer. The computer will
recognize the camera and will install the software itself.
Click on "My Computer" and select "Removable Disk".
Then click "DCIM" and "100DSCIM"
and videos.
27
camera)
®
to find all your photos