Winkhaus panicLock AP4 Série Instructions D'installation page 88

Installation, Operating and
Maintenance Instructions
EN
5.3 Emergency exit locking system AP179-AV3 OR, BM-EN179
Article
no.
STV-AP
b)
STV-BM
b) c)
5
STV-AP
179 AV3
OR
a) d) e)
STV-AP
179 AV3
OR FF
a) d) e)
Maximum door sash height: 2500 mm
Maximum door sash width: 1500 mm
All locks alternatively with 1.5 mm rreduced latch. If the cylinder (PZ, RZ)
standard or half-cylinder is the escape door function of the lock is only
guaranteed when the key is removed. The closure may be equipped with a
maximum of two additional bolt locks.
a) All types of cylinder locks do not affect the proper escape door function.
b) All locking cylinders with proof of suitability according to the FZG Test
Guideline Gütegemeinschaft locks and fittings e. V. as well as "profile
cylinder in accordance with EN 1303 (corrosion resistance class 3)
generally with cam position ± 30°" may be used without further proof.
Mechatronic cylinder only as specified by the manufacturer.
c) An emergency power back up must ensure that the bolt always reaches
the end position in the event of a power failure.
d) An alternative to motor box EAV.
e) Optionally with reducing sleeve 10/9 in steel.
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
VS- Func- Backset
type tion
B/D I 35 - 80 mm 92 mm PZ
B/D I 35 - 80 mm 92 mm PZ
B/D I 35 - 80 mm 92 mm PZ
B/D I 35 - 80 mm 92 mm PZ
panicLock AP4 + AV3 OR
Centre Faceplate
distance
Flat ≥ 16 mm
U ≥ 22 x 6 mm
94 mm RZ
Flat ≥ 16 mm
94 mm RZ U ≥ 22 x 6 mm
Flat ≥ 16 mm
U ≥ 22 x 6 mm
94 mm RZ
Flat ≥ 16 mm
94 mm RZ U ≥ 22 x 6 mm
38 5051068
Classification Drk
3 7 6B1 3 4 2AB/D 1 - 7
3 7 6B1 3 4 2AB/D 1 - 7
3 7 6B1 3 4 2AB/D 1 - 7
3 7 6 0 1 3 4 2AB/D 1 - 7