Puky Ceety Mode D'emploi page 27

changing from push mode to play
could cause injury or inhibit play.
By making a few adjustments after the conver
sion you will be able to easily change between
push mode and play mode. The seat padding,
backrest and seat belt will then remain
detached and no longer used.
Removing Seat Belt
the seat belt.
T
T
the belts from the seat and detach the belt
Detaching Seat Padding
T Release the fastener at the back and fold
T Remove the padding by pulling it over the
User Manual
T Pass the two belt sections back through the
backrest so that you can access the clips.
T Remove the clips from the loops and pull
the belt sections forward completely out of
T
to undo the two screws in the seat and
detach the seat moulding from the seat
T
moulding.
T Place the seat moulding back on to the seat
so that the screws in the seat moulding pass
through the holes in the seat.
T
the correct position with one hand and,
using the Allan key, screw the first screw
into the nut in the seat mount. Exert a little
pressure on the screw in order to feel the
T Now fit the second screw and tighten both
Removing Backrest
T
T
T Release the other side and completely
remove the backrest.
25
GB