Puky Ceety Mode D'emploi page 23

T Replace the two clips in the loops of the
T Then attach the corresponding padding
T
so that the clips are pulled into the recesses
in the backrest where they are firmly held
T Push the backrest forward, pull the back
padding over the backrest and align
T Place the backrest in an upright position
and lock it with the red fastener at the back
T
they are secure.
Attaching Shoulder Bag
T
shoulder bag.
T Place the retaining tabs around the two
User Manual
Adjusting Seat Position
mounted seat on the frame to adjust the seat
position to the size of the child. In this way you
set the correct distance of the seat to the
handlebars while also setting the optimum
height.
T
by firmly holding the screw with the supplied
T Slide the seat to the required position
seat belt are trapped.
Footrests
Mount the footrests as described in the sepa
rate assembly instructions.
Final Check
After assembly, always check that all screws
are firmly tightened and mounted parts are
secure. Make sure that all parts have been
is left over.
Disposing of Packaging
Dispose of the packaging and protective
material at the local collection and recycling
centres. The material does not belong in the
household waste.
21
GB