3. Guarantee and liability
3.1 Guarantee conditions
The manufacturer guarantees the VDA
EExe for a period of one year following
installation. Guarantee claims may only
be submitted for material faults and/
or construction faults arising during the
guarantee period. On-site disassembly
and assembly costs are not covered by
the terms of the guarantee. In the case of
a guarantee claim, the VDA EExe may not
be dismantled without written permission
from the manufacturer. Spare parts are
only covered by guarantee, if they were
supplied by the manufacturer and have
been installed by an approved installer.
If a roof extract fan defect occurs
�
during the guarantee period, please
notify the installer.
The guarantee will be cancelled, if:
Installation has not been carried out
�
according to the applicable regulations;
The damage was caused by incorrect
�
connection;
The damage was caused by inexpert
�
use resulting in excess soiling of the
fan, fan housing or other components of
the roof extract fan;
The wiring has been altered;
�
Repairs have been made to the fan by
�
unauthorised parties;
The unit has been used without a grille;
�
Parts are used which were not supplied
�
by the manufacturer;
Unauthorised alterations and/or
�
modifications have been made to the
unit;
The instructions and regulations in this
�
manual have not been adhered to;
The guarantee period has elapsed.
�
3.2 Liability
The VDA EExe was designed and
manufactured to extract used air from
a room. Any other application is seen
as 'inappropriate use' and can result in
damage to the VDA EExe or personal
injury, for which the manufacturer cannot
be held liable.
The manufacturer is not responsible
for any damage derived from:
Non compliance with the installation,
�
safety and maintenance instructions in
this guide;
The use of components not supplied by
�
the manufacturer.
Responsibility for the use of such
components lies entirely with the
installer;
Normal wear and tear.
�
4. Safety
General safety regulations
Always comply with the safety
�
regulations of this manual.
If the safety regulations, warnings,
comments and instructions are not
complied with, this can lead to personal
injury or damage to the VDA EExe.
Installation of the VDA EExe must
�
be carried out in accordance with
the general and locally applicable
construction, safety and installation
instructions of the local council and
electricity board;
EN - 17