Cleaning And Maintenance - Eureka MIGNON Manuel D'instructions

the screw completely.
• Lift or lower the fork to adjust it according to the filter holder dimensions.
• Once having found the correct position, tighten the fork fixing screw (7).
• The fork is suitable for any kind of filter holder available on the market.
6

CLEANING AND MAINTENANCE

ATTENTION
Unplug the grinder from the electrical net before performing any cleaning and
maintenance. Do not pull the feeding cable or the grinder itself to unplug.
ATTENTION
Maintenance and cleaning operations must be performed by trained technicians,
authorised by the producer.
ATTENTION
Do not perform any approximate maintenance and always use original spare
parts.
6.1 CLEANING
Cleaning is fundamental for the correct use of the grinder. A neglected grinder can
negatively impact on the coffee dispensing and on the precision of the dose and the
grind. Before cleaning, check if the grinder is unplugged.
6.2 HOPPER CELANING
Clean the internal parts of it with water and neutral soap, taking off any oil left by the
coffee beans. Rinse and dry it carefully. Perform the same on the cover. Do not use the
dish-washer.
6.3 GRINDING SYSTEM CLEANING
After having removed the lid, open the upper burr holder. Then, clean the blades and the
other internal parts with a brush or a dry cloth. If necessary, use a vacuum cleaner or an
air compressed jet. After having installed back the upper burr holder and the lid, install
the hopper. For a complete cleaning, use detergent pills.
ATTENTION
Any cleaning operation must be performed with food use approved products.
32
ME041-5-5A-A0-R00_MANUALE ISTRUZIONI MIGNON XL IT-EN-DE-FR-ES.indb 132 ME041-5-5A-A0-R00_MANUALE ISTRUZIONI MIGNON XL IT-EN-DE-FR-ES.indb 132
EN
03/12/2020 15:50:22 03/12/2020 15:50:22