Cleaning And Maintenance - Eureka ATOM Manuel D'instructions

EN
6.6.7 APPLIANCE DEFAULT VALUE SETTING
Press the key (5)
ones. The total counters are not reset.
The display appears as the one of appliance switch ON.
7.

CLEANING AND MAINTENANCE

ATTENTION
Unplug the appliance before performing any cleaning and maintenance operation.
ATTENTION
Do not pull the power cable or the appliance itself to disconnect the plug from the
power supply socket.
7.1 CLEANING
Cleanliness is a basic aspect for the proper functioning of the coffee grinder with a dosing unit.
A neglected coffee grinder with dosing unit may have a negative impact on coffee dispensing
as well as on the accuracy of dose and grinding. Before cleaning, make sure the appliance is
unplugged. At least once a week, clean the coffee bean container (8), removing the oily coat left
by coffee beans by means of a clean cloth.
It is furthermore necessary to often clean (several times a day) the dispensing spout (13)
through a brush and a vacuum cleaner.
In case such operations are not carried out, the aromatic oily part contained in coffee may turn
rancid with negative consequences on coffee, furthermore the lack of cleanliness may jeopard-
ize regularity of the dose itself.
Clean the base by means of a damp cloth.
7.2 MAINTENANCE
ATTENTION
Maintenance is to be performed only by skilled personnel authorized by the manu-
facturer.
ATTENTION
Do not carry out improvised or precarious repairing and do not use non original spare
parts.
In order to ensure a proper functioning of the appliance, check and eventually replace the
blades every 350 Kg of ground coffee for flat blades.
8. TROUBLESHOOTING
Contact skilled personnel.
and switch ON the appliance to reset the values at the preset default
13