Proper Use; Transport / Storage / Wintering / Preservation; Improper Use - Pentair 5MPR Notice D'installation Et D'entretien

2.3.2 Other safety components and regulations
Instructions oh the handling and use of electrical equipment
Work on electrical components must be carried out only by
a qualified electrician in accordance with accepted techni-
cal practice.
The operating instructions provided by the motor manufac-
turer must also be followed at all times.
The electrical equipment of the pumps must be inspected
and checked regularly. Faults such as loose connections or
singed cables must be rectified immediately.
3.

Proper use

The pumps are designed for the pumping of clear or slightly
cloudy water in swimming pools and whirlpools, and for wa-
ter circulation in supply operation. In case of other media or
applications, the exact usage specification must be discus-
sed with the manufacturer.
The pumps must only be used as specified in these opera-
ting instructions. Any other form of use constitutes improper
use. In this case, the manufacturer accepts no liability for
any resulting damages.
The pumps have been designed and constructed to the la-
test state of the technology, and are completely safe and re-
liable if used in accordance with these operating instruc-
tions and any other specific system or operating require-
ments.
Nevertheless, their use may still give rise to danger to life
and limb of the operator or other persons, or damage to the
pumps and other equipment.
Modifications to the pumps are possible in certain cases. In
such cases, advance, written approval must be obtained
from the manufacturer.
The manufacturer accepts no responsibility in the
following cases:
Failure to observe the information in these operating
instructions;
Use of spare parts or components not approved by
the manufacturer;
Incorrect operation;
Removal, modification or deactivation of safety devices;
Modification of functions;
Non-approved modifications to the swimming pool
pumps;
Improper performance of maintenance work;

Improper use.

3.1 Improper use
The pumps may cause dangers if used improperly or not for
their intended purpose.
Under no circumstances must the
pumps be used for:
aggressive fluids
inflammable fluids
toxic fluids
The operating instructions must be available to the user,
maintenance and repair personnel throughout the complete
usage period of the pumps. Keep a copy of these operating
instructions with the pumps! Have a copy of these operating
instructions available during all maintenance and repair
work!
The information in the operating instructions
must be followed at all times! Any other form of
use of the pumps will invalidate
any liability or guarantee on the part of the manu
facturer!
Harmful materials must be disposed of so as not
to cause any danger to persons or the
environment. The applicable legal regulations
must be observed.
4. Transport / storage /
wintering / preservation
The complete delivery should be checked immediately on
arrival for completeness and any possible transport dama-
ge. Complaints will only be accepted if they are reported to
the haulier or manufacturer on the day of delivery.
4.1 Unpacking
The packaging material should be reused if possible, or dis-
posed of in accordance with local regulations.
Dispose of packaging material and insulation
properly. National regulations must be observed.
4.2 Storage / wintering / preservation
Extended intermediate storage in an environment
with high air humidity and changing
temperatures should be avoided. Condensation
may damage the motor windings and other metal
parts. This will invalidate the guarantee.
The pump may also be damaged if exposed to
frost. This will also invalidate the guarantee. Anti-
freeze must not be used, since this can cause
damage to plastic parts.
In the event of risk of frost, the pump should be drained. To
do this, open the drain plug and allow the water to drain out
of the pump. The piping system should also be emptied
18
> <