Horizon Fitness T100 Manuel Du Propriétaire page 13

ASSEMBLY STEp 4
ARC WASHERS (H)
SCREWS (G)
CONSOLE CABLE
UPRIGHT MAST
CONSOLE
HAND GRIP POST
CONSOLE
CONSOLE CABLE
COVER
HARdWARE bAG 4 CONTENTS :
SCREW (G)
10 mm
Qty: 4
Open hardware bag 4.
A
Slide the console onto the hand grip posts.
B
Attach the hand grip posts to the console
C
using 4 screws (g) and 4 arc washers (h)
from the below the console.
NOTE: Be careful not to pinch any wires
while attaching the console.
Connect the console cables and carefully tuck
D
wires in mast to avoid damage. Note: do not pinch
console cable. Be sure the console cable prongs
are aligned and the ends are tightly seated into each
other.
Attach console cable cover.
E
go back and completely tighten all bolts and screws
F
from steps 1-4.
ARC WASHER (H)
12 mm
Qty: 4
13