Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY STEp 3
HARdWARE bAG 3 CONTENTS :
BOLT (B)
15 mm
Qty: 6
HAND GRIP
CONSOLE MAST
ARC WASHERS (F)
BOLTS (B)
12
SPRING WASHER (C)
FLAT WASHER (D)
15 mm
15 mm
Qty: 4
Qty: 4
CONSOLE CABLE
(THREAD THROUGH HOLE
IN RIGHT HAND GRIP)
Open hardware bag 3.
A
Insert left hand grip onto upright
B
console mast.
ARC WASHER (F)
18 mm
Qty: 2
Attach the left hand grip to the console
C
mast using 2 bolts (b), 2 spring
washers (c) and 2 flat washers (d)
from the inside and 1 bolt (b) and 1 arc
washer (f) from the front.
Carefully thread the console cable through
D
the hole in the right hand grip.
Attach the right hand grip as explained
E
above in steps b–c.
NOTE: Do not completely tighten any
screws or bolts until
NOTE: Be careful not to pinch any wires
FLAT WASHERS (D)
while assembling the masts.
SPRING WASHERS (C)
BOLTS (B)
step 4
is complete!
Publicité
Table des Matières
