Fastening Braces And Gearmotors; Electrical Connections - Motostar SLS24 Manuel D'installation

Fastening braces and gearmotors

Assemble the post, extra and tail braces and weld them.
Open the gate to 90°, weld or fasten the braces by using suitable bolts while respecting the measurements.
 The fastening measurements are listed in the paragraph titled MEASUREMENTS AND APPLICATIVE DIMENSIONS.
Fasten the gearmotors to the tail and head braces by using the supplied washers and bolts.
Post bracket
Extra brace
Tail brace

Electrical connections

L N M1 N1 ENC1 EB1 V1 M2 N2 ENC2 EB2 V2
M2 - Delayed
action when
closing
M1 - Delayed
action when
opening