Self-Learning Of The Gate-Leaf Travel - Motostar SLS24 Manuel D'installation

Self-learning of the gate-leaf travel

 Before calibrating the gate travel, position the gate half-way, check that the maneuvering area is clear of any obstruction and
check that there are mechanical opening and closing stops.
 The mechanical end-stops are obligatory.
Important! During calibration, all safety devices will be disabled.
Select A3.
Press ENTER to confi rm.
Select 1 and press ENTER to confi rm the self-learning procedure.
The fi rst gearmotor leaf will perform a closing maneuver until the
closing strike ...
... then, the second gearmotor leaf will perform the same
maneuver ...
a 3
i
M1
C l i
M2