Mettler Toledo AL Mode D'emploi page 15

4.3.9 Send mode (9th menu option / see overview and notes in Section 4.1)
Note: This menu option is only available if the "Host" setting was selected in the 8th menu option (Peripheral unit)!
It specifies how a value is transferred to a peripheral device.
S. o FF
" " " " "
S. S tb
S. C ont
S. A uto
S. A LL
4.3.10 Send format (10th menu option / see overview and notes in Section 4.1)
Note: This menu option is only available if the "S.oFF" setting was not selected in the 9th menu option ("Send mode")!
It sets the data transfer format.
S. S ICS
" " "
" "
S. P ŸÖ
4.3.11 Baud rate (11th menu option / see overview and notes in Section 4.1)
Note: This menu option is only available if the "Printer" or "Host" setting was selected in the 8th menu option (Peripheral unit)!
bd 2400
" " "
" "
bd 4800
" " " " "
bd 19200
S.oFF Send mode switched off.
S.Stb The next possible stable value will be transferred after the «±
has been pressed.
S.Cont All values are transferred automatically.
S.Auto Only stable values are transferred automatically.
S.All The current value is transferred after the «±
"S. SICS": The MT-SICS data transfer formats are used. Please refer to the
"Reference Manual MT-SICS B-S/L/L-S balances 11780447",
available from your METTLER TOLEDO dealer or downloaded from the
Internet (www.mt.com/pl or www.mt.com/al see "Support"). More
Information please find in the Section 6.3.
"S. PM"*: The following PM balance data transfer formats are used:
S.Stb:
S.Cont: S////1.67890/g SD///1.39110/g
S.Auto: S////1.67890/g
S.All:
* unidirectional, no MT-SICS commands are accepted.
The baud rate (data transfer rate) determines the speed of transmission via the serial
interface. The unit is the baud (bd) = 1 bit/second.
The following settings are available: 600 bd, 1200 bd, 2400 bd, 4800 bd, 9600 bd
and 19200 bd.
For problem-free data transmission the sending and receiving devices must be set at
the same value.
± » key has been pressed.
± ±
±
/////1.67890/g
/////1.67890/g
/D///1.39110/g
Menu
15
± » key
± ±
±