Menu Operation; Description Of Menu Options - Mettler Toledo AL Mode D'emploi

Menu
12

4.2 Menu operation

0. 0 1 g
Menu
ŸÖENU
▼
rESEt
rESEt
± ±
± ± ±
F count
F count
" " " " "
F 100
StorEd
Menu
0. 0 1 g
0. 0 1 g
C

4.3 Description of menu options

4.3.1 Reset or recording of balance settings (1st menu option "RESET")
rESEt
Menu
r donE
0. 0 0 g
rESEt
" " "
" "
LISt
StorEd
Menu
0. 0 0 g
Opening the menu
In weighing mode, press and hold down the «Menu» key until "MENU" appears in the
display. Release the key: the 1st menu option is displayed.
Select menu options
The «± ± » key is used to select individual menu options with their current settings one
± ± ±
after the other.
PCS
Change settings
PCS
Pressing the «"
the previous one. Once the desired setting appears in the display, the next menu
%
option can be selected («±
Saving settings and closing the menu
Hold the «Menu» key down until "StorEd" appears in the display. Release the key and
the balance reverts to weighing mode. All changes are saved.
Abort
Press the «C» key briefly. The balance reverts to weighing mode. Changes are not
saved.
Note
If no entry is made within 45 seconds, the balance reverts to weighing mode.
Changes are not saved.
Reset balance settings
➞ Select "Reset", press and hold down the «Menu» key until the message "r donE"
confirms that all menu settings have been reset. The balance then reverts to
weighing mode and works with the factory settings (Section 4.1).
Recording balance settings
➞ Select "List" and hold down the «Menu» key until the message "StorEd" is
displayed.
The current balance settings are transmitted to the peripheral device connected to
the optional RS232C interface. To do this the setting "Printer" must always be
selected at the 8th menu option (Peripheral unit). The current balance settings
are saved at the same time.
" » key displays the next setting; pressing the «1/10d» key displays
" "
"
± ») or you can close the menu (see following Section).
± ±
±