Weighing; On/Off Switching; Simple Weighing; Faster Weighing With Reduced Readability - Mettler Toledo AL Mode D'emploi

Weighing

10
3 Weighing

3.1 On/Off switching

On
88888888
▼
0. 0 0 g
OFF
Off
▼

3.2 Simple weighing

0. 0 0 g
• 1182. 0 3 g
1250. 0 0 g

3.3 Faster weighing with reduced readability

The balance has the facility for speeding up the weighing operation by reducing its readablity (number of decimal places):
1. 2 4 g
1/10d
1. 2 g

3.4 Taring

0. 0 0 g
121. 0 1 g
# # # # #
0. 0 0 g
95. 9 7 g
-121. 0 1 g
Switching on
➞ Remove any load from weighing pan and press «On» key briefly.
The balance performs a display test (all segments in the display light up briefly).
When zero is displayed, the balance is ready for operation.
Switching off
➞ Press and hold the «Off» key down until "OFF" appears in the display. Release the
key.
➞ Place weighing sample on the weighing pan.
➞ Wait until the stability detector "•" disappears.
➞ Read the result.
➞ The balance is operating with its normal readability and speed.
➞ Press the «1/10d» key and ...
➞ ... the balance operates with reduced readability
displays the weighing result quicker. Pressing the «1/10d» key briefly again
toggles the balance back to its full readability.
➞ Place empty container on the balance.
➞ The weight is displayed.
➞ Press the «#
# » key briefly.
# #
#
➞ Add weighing sample to container. The net weight is now displayed.
If the container is removed from the balance, the tare weight will be shown as a
negative value.
The tare weight remains stored until the «#
balance is switched off.
reduced readability (one decimal place less), but reduced readability reduced readability
reduced readability
# » key is pressed again or the
# #
#