Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
COMBUSTIBLE Mantel Clearances H5 and H6 appliances (when using
DOES NOT APPLY TO LX2 2200J MODELS AS HEATSHIFT IS MANDATORY FOR THOSE MODELS.
See instructions packed with the 2200J fi replace for details regarding mantels and projections
Sidewall clearances remain as stated in the installation manual packed with the appliance.
WARNING
!
RISK OF OVERHEATING
AND FIRE!
Ensure LDK installation is com-
plete AND internal convection
baffl e is removed (see page
13) when using these combus-
tible mantel clearances.
12
Cement board as specified
in installation manual
packed with appliance
LDK Duct Kits
NOTE: These Mantel Clearances
apply ONLY when LDK Duct
system is installed
45°
10"
6"
Note: Combustible wall finish
up to 1" thick may be installed
over cement board and butt up
to flat trim plates OR fixed
framing plate projection.
DO NOT COVER PLATE OR
PROJECTION WITH
COMBUSTIBLES.
Bottom of Unit
4" minimum to
combustible
hearth
Combustible
materials must
be kept behind
this line
H5= 39"
Mantel
H6= 44-1/2"
Height
(from
H5= 35"
Bottom
of Unit)
H6= 40-1/2"
Publicité
Table des Matières
