Thrustmaster TFRP Manuel De L'utilisateur page 6

AVAILABLE AND
APPLICATIONS
(only with the TFRP pedal set, when connected to the RJ12/USB
adapter)
ADVANCED CALIBRATION SOFTWARE
(T.RJ12 USB ADAPTER Calibration Tool)
Go to http://ts.thrustmaster.com/ (click on Updates and Downloads, then PC / Joysticks
/ TFRP Rudder Pedals, and Software) to download and install the advanced calibration
software, which lets you:
- Adjust the dead zones to your liking at the beginning and end of the range of travel on the
rudder axis, and on the 2 differential brake axes.
- Adjust the central dead zone to your liking on the rudder axis.
- Save these adjustments directly in the internal memory of the adapter (5).
T.A.R.G.E.T ADVANCED PROGRAMMING SOFTWARE
(Thrustmaster Advanced pRogramming Graphical EdiTor)
Go to http://ts.thrustmaster.com/ (click on Updates and Downloads, then PC / Joysticks
/ TFRP Rudder Pedals, and Software) to download and install the T.A.R.G.E.T advanced
programming software.
Main features of T.A.R.G.E.T:
- A variety of configurations are available for the axes of the rudder and differential brakes.
- Different programming levels are available: Basic, Advanced and Script.
- Uses the Drag and Drop principle.
- The TFRP pedal set can be used in conjunction with a variety of Thrustmaster controllers
(Hotas Cougar, Hotas Warthog, T.16000M, MFD Cougar Pack, also compatible with
T.A.R.G.E.T), allowing for them to be recognized as a single USB device.
- Advanced profiles are available, created by members of the Thrustmaster community.
IMPORTANT NOTES REGARDING AUTOMATIC CALIBRATION OF
AXES
To avoid any calibration problems:
- Always leave the rudder axis centered (without placing your feet on the rudder) when
connecting the TFRP pedal set, the adapter's USB connector or the T.FLIGHT HOTAS 4
joystick's USB connector.
- Never connect the pedal set to the adapter (or to the T.FLIGHT HOTAS 4 joystick) when
the adapter is connected to a PC (or when the joystick is connected to a PC or game
console), or during a game.
- Never disconnect the pedal set from the adapter (or from the T.FLIGHT HOTAS 4
joystick) when the adapter is connected to a PC (or when the joystick is connected to a
PC or game console), or during a game. Power off the PC or game console first.
- Always connect the pedal set to the adapter (or to the T.FLIGHT HOTAS 4 joystick)
before connecting the adapter's or joystick's USB connector to the PC or game console.
The pedals' 3 axes automatically calibrate themselves after a few movements, and after
having reached the physical stops for the rudder axis and the 2 differential brake axes.
COMPATIBLE

3/6
ADVANCED SOFTWARE
