Thrustmaster TFRP Manuel De L'utilisateur page 5

INSTALLATION ON PC
1. Connect the TFRP pedal set's male RJ12 connector (4) to the female RJ12 connector (6)
on the adapter (5).
2. Set the adapter's selector switch (8) to the AIRPLANE position
3. Go to http://ts.thrustmaster.com/ (click on Updates and Downloads, then PC /
Joysticks / TFRP Rudder Pedals, and Drivers) to download and install the PC driver and
its customized Windows Control Panel interface.
4. Once the PC driver has been installed, connect the adapter's USB connector (7) to one of
the USB ports on your PC.
5. The adapter's LED (9) lights up in GREEN.
6. To access the Control Panel, select:
- Start / All Apps / Thrustmaster / Control Panel or Control Panel (in Windows® 10 / 8.1 /
8); or
- Start / All Programs / Thrustmaster / Control Panel or Control Panel (in Windows® 7
/ Vista)
The Game Controllers dialog box is displayed.
The accessory appears onscreen with the name T-Rudder and OK status.
7. In the Game Controllers dialog box, click Properties to test and view all functions.
You are now ready to play!
INSTALLATION ON THE T.FLIGHT HOTAS 4 USB JOYSTICK
(do not use the RJ12/USB adapter in this setup)
The TFRP pedal set connects directly to the Thrustmaster T.FLIGHT HOTAS 4 joystick.
1. Connect the TFRP pedal set's male RJ12 connector (4) to the female RJ12 connector
located at the back of the T.FLIGHT HOTAS 4 joystick.
2. Next, connect the T.FLIGHT HOTAS 4 joystick's USB connector to one of the USB ports on
your PC or game console.
The T.FLIGHT HOTAS 4 joystick is compatible with PC and PlayStation®4 and features 8
axes, 3 of which are reserved for the TFRP pedal set.

USING THE RJ12/USB ADAPTER
2/6

.