Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
DIRECTIONS FOR USE
FIGURE 2
Gauge
Plate
CAUTION!
Blade
SHARP BLADE!
Food
Locking
Screw
Food
Pusher
Sliding
Food
Carriage
Power Switch
FIGURE 2A
Power Switch
1. Make sure the Blade is properly secured by tightening the screws on the
front of the blade and securely attaching the face plate to the front of the
blade.
2. Place the Meat Slicer on a flat stable surface. Be sure the Power Switch is
in the "O" off position. Plug the appliance into a properly rated electrical outlet
(120V AC, 60Hz) (FIGURE 2A).
3. Place a tray or plate behind the Meat Slicer and below the Blade to collect
the sliced food as it exits the Blade area.
4. Place food on to the Sliding Food Carriage between the Gauge Plate and
the Food Pusher. To avoid danger of injury, ALWAYS use the Food Carriage
and Food Pusher while slicing (FIGURE 2).
6
Publicité
Table des Matières
