How To Use The Dehydrator - Weston 75-0401-W Mode D'emploi

HOW TO USE THE DEHYDRATOR

NOTES:
• Food should be stored in an airtight container
once properly cooled.
• To START, PAUSE, or RESET:
Press or press and hold the START/STOP button.
• To Change Time or Temperature During
Drying Without Pausing or Resetting: Press
the TIME/TEMP button once for time or twice
for temperature. The last setting will flash.
Use arrows to adjust. Unit will continue drying
automatically at the new setting.
1. Plug in unit. Default time "00" will flash on
the display. FIGURE 7
2. Press the + arrow to set the drying time.
Maximum drying time is 48 hours, which can
be set in 1-hour increments. FIGURE 8
3. Press the TIME/TEMP button to set the
temperature. Default temperature "130" will
flash on the display. FIGURE 9
4. Press the + or – arrow to set the drying
temperature. Press the TIME/TEMP button to
adjust the temperature for Fahrenheit. Press
and hold the TIME/TEMP button for 2 seconds
while TEMP is displayed to change from ºF
to ºC. Temperature can be set from 100°F to
160°F in 5° increments. NOTE: Default
setting is Fahrenheit. If you reset this unit or
unplug it while it is set for Celsius, it will go
back to Fahrenheit. FIGURE 10
5. Press the START/PAUSE button to start
drying. The display will alternate from showing
TIME and TEMP over the drying period.
lid, for proper drying. FIGURE 11
6
FIGURE 7
FIGURE 8
FIGURE 9
FIGURE 10
FIGURE 11