Display Brightness; Power Management - AEG IAE84881FB Notice D'utilisation

1. Insert the Food Sensor inside the food or
liquid up the minimum level mark.
2. Touch on the display to open the
Food Sensor menu and choose
Thermometer. You can also touch
Hob Functions > Thermometer.
3. Touch Start.
Measuring starts on the active cooking
zone.
If none of the cooking zones is active an
info pop-up window appears.
To stop the function, touch the digits
indicating the temperature or
Stop.
6.15 Melting
You can use this function to melt different
products, e.g. chocolate or butter. You can
use the function only for one cooking zone at
a time.
1. Touch on the display to open the
Menu.
2. Select Hob Functions > Melting from the
list.
3. Touch Start.
You need to select the desired cooking
zone.
If the cooking zone is already active a
pop-up window appears. Cancel the
previous heat setting to activate the
function.
To leave the Menu, touch
of the display, outside of the pop-up window.
To navigate through the Menu, use or .
To stop the function, touch the zone selection
symbol and then touch Stop.
6.16 Language
1. Touch on the display to open the
Menu.
2. Select Settings > Setup > Language from
the list.
3. Choose the appropriate language from
the list.
If you chose the wrong language, touch
A list appears. Select the third option from
the top, then the last but one option. Next,
select the second option. Scroll down to
18 ENGLISH
>
and select
or the right side
.
choose the appropriate language from the
list. Finally, choose the option on the right.
To leave the Menu, touch
of the display, outside of the pop-up window.
To navigate through the Menu, use or .
6.17 Key Tones / Buzzer Volume
You can choose the type of sound your hob
emits or turn the sounds off entirely. You can
choose between the click (default) or beep.
1. Touch on the display to open the
Menu.
2. Select Settings > Setup > Key Tones /
Buzzer Volume from the list.
3. Choose the appropriate option.
To leave the Menu, touch
of the display, outside of the pop-up window.
To navigate through the Menu, use or .

6.18 Display Brightness

You can change the brightness of the
display.
There are 4 brightness levels, 1 is the lowest
and 4 is the highest.
1. Touch on the display to open the
Menu.
2. Select Settings > Setup > Display
Brightness from the list.
3. Choose the appropriate level.
To leave the Menu, touch
of the display, outside of the pop-up window.
To navigate through the Menu, use or .

6.19 Power Management

If multiple zones are active and the
consumed power exceeds the limitation of
the power supply, this function divides the
available power between all cooking zones.
The hob controls heat settings to protect the
fuses of the house installation.
• Cooking zones are grouped according to
the location and number of the phases in
the hob. Each phase has a maximum
electricity loading of 3680 W. If the hob
reaches the limit of maximum available
power within one phase, the power of the
or the right side
or the right side
or the right side