Connection Of The Led Illuminators - Videotec ULISSE Manuel D'instructions

8.8 Connection of the LED
illuminators
Open the housing as described (Fig. 7, page 15).
Insert the power supply cables through the cable
glands by at least 25 cm.
25cm
Fig. 34
To ensure the safety and the correct
operation of the unit do not leave a surplus
of the cable externally.
MNVCUPT3_1511_EN
Connect the cables as shown in figure.
25cm
Fig. 35

CONNECTION OF THE LED ILLUMINATORS

Left illuminator
Reference
on the
board
WH
BK
A1
B1
Tab. 8
Left illuminator
Cable color
White
Black
Green
Red
Right illuminator
Right illuminator
Reference Cable color
on the
board
WH White
BK Black
A2 Green
B2 Red
25