Technical Specifications - IKRA ITHK 800 Manuel D'utilisation

Telescopic pole pruner & hedge trimmer (2 in 1) ITHK 800

TECHNICAL SPECIFICATIONS

Model
Operating voltage
Nominal frequency
Nominal power consumption
Idle speed n
0
Cutting length
Cutting capacity
Saw chain
Guide plate
Weight without cable
Noise pressure level
Vibration
1) EN ISO 11680-1:2011
2) EN ISO 10517:2009
WARNING:
pending on how the tool is used, as in the following examples or because it is used in another way:
- How the tool is being used and which materials are being cut.
- The tool is well maintained and in good working order. The correct accessories are being used and care has been
taken to make sure they are sharp and in good working order.
- How secure the hand grip is and whether anti-vibration accessories are being used.
-
- The tool can cause hand-arm vibration syndrome symptoms if it is not used properly.
WARNING: To make sure, an assessment should be made of the strain exerted when the tool is in use, for example
entire time the tool is in use.
- Minimise your risks if the tool vibrates.
-
- If you use this tool regularly, you should invest in anti-vibration accessories.
- If the temperature is 10°C or less, do not use the tools. Prepare a work schedule so that work is distributed over
several days when using tools that exert high vibrations.
GB | Operating Instructions
ITKS 800
V~ 230-240
Hz 50
W 800
-1
min 9000
mm 200
mm
91P033X
080NDEA041
kg 4,5
dB (A) 86
K 3,0 dB(A)
2 2 K 1,5 m/s
m/s 4,5 m/s
GB-4
ITHS 800
230-240
50
800
1700
410
18
5,0
1)
86
2 1) 2
4,5 m/s
2)
K 3,0 dB(A)
2 2)
K 1,5 m/s
-