Burkert 8022 Guide De Démarrage Rapide page 5

→
Wire the device following the possibilities described
below.
7.2.1. connection of the flow
transmitter
8022
12 - 30 V DC
GND
When operating as a flow transmitter, the NPN
and PNP outputs have no function.
Fig. 4: Connection of the flow transmitter
English
16
8. coMMissioninG
note!
• Only power on the device when the cover is closed.
• Switch off the device before removing the operating
unit.
9. seTTinG anD funcTions
→
Parameterize the device depending whether it is used
as a flow transmitter or a pulse divider. Refer to the
instruction manual on the delivered CD.
10. MainTenance
The flow transmitter / pulse divider Type 8022 is mainte-
nance-free when operated according to these operating
instructions.
English
18
12 - 30 V DC
4 - 20 mA
7.2.2. connection of the pulse divider
8022
12 - 30 V DC
Connection
of the NPN
NPN
output
GND
8022
12 - 30 V DC
Connection
PNP
of the PNP
output
GND
Fig. 5: Connection of the pulse divider
11. PackaGinG, TransPorT,
sToraGe, DisPosal
note!
Transport damage!
Inadequately protected equipment may be damaged
during transport.
• During transportation protect the device against
moisture and dirt in shock-resistant packaging.
• Do not allow the temperature to exceed or drop below
the permitted storage temperature.
Incorrect storage may damage the device.
• Store the device in a dry and dust-free location!
• Storage temperature. -20 ... 65 °C
Damage to the environment.
• Dispose of the device and packaging in an environ-
mentally friendly manner.
• Observe applicable regulations on disposal and the
environment.
e.g. PLC
V+
IN
GND
e.g. PLC
V+
IN
GND
English
17
English
19