Arregui AWA Mode D'emploi page 37

Once you've finished configuring the options, press the "SAVE"
button. The knob will light up in green to confirm that the
settings have been saved correctly.
Username
Password
Activate access control timetable
Daily control
Time control
NOTE: The password must be 6 or 7 digits long and you may
not use one that has been used before.
The Administrator can at any point check the password of a
user that has already been set up by pressing the icon below
on the user menu:
e. See the event log for the connected safe
On the main menu you can see an event log for the safe that
is connected via Bluetooth, organised in chronological order.
f. Setting an opening delay
If you choose, you can press the "System options" button to
set a delay time for the safe to open, for both users and the
Administrator.
To do this, press the digit that appears next to said option and
enter the number of minutes that you would like to safe to wait
for before opening ("0" means that there will be no opening
delay).
NOTE: The safe may not be opened once an opening delay
has already been triggered. The delay time remaining will be
displayed on the app once a new opening has been requested.
g. Configure settings
NOTE: Bear in mind that your smartphone will need to be con-
nected to the internet for the changes to be saved correctly.
Pressing this button will allow you to access the following
settings.
• Setting the frequency for checking connection with the
server, for the Cloud server to check that the safe is con-
nected to the WiFi.
NOTE: The more often these checks are performed, the
quicker the battery power will be used up, meaning it will
need to be recharged more regularly. Use the following
guide as a reference:
- Every 30 min. -->Self-sufficient battery approx. 35 days.
- Every 60 min. --> Self-sufficient battery approx. 54 days.
- Every 90 min. --> Self-sufficient battery approx. 67 days.
It is set at 30 minutes by default, and can be changed at
any point by the Administrator.
You can deactivate this Cloud supervision option by
selecting "0" in the drop-down list, but if there is a loss of
WiFi connection, both the Administrator and any designated
users will receive a notification once the connection has
been restored, which will also be recorded as an event in
the "Logs" menu.
NOTE: Setting the value "0" in this option also disables the
automatic battery level control.
37
En