Morso FORNO Mode D'emploi page 10

• When the ash is cold, it can be used as fertiliser in your garden, or disposed of with ordinary
refuse.
ASSEMBLING THE MORSØ FORNO
Morsø Forno weighs approx. 96 kg. To avoid injury during unpacking and assembling the stove, we
recommend that 2 people should carry out this work.
The stove may have pale markings on delivery. These are a result of assembly and handling during
production. Marks will probably also arise when you assemble the stove. They can easily be removed
using a slightly damp cloth.
Assembling your Morsø Outdoor Oven
1. Place the plinth on a flat surface, preferably where you want the stove
to be.
Remember to allow for the total diameter of 75 cm and separation from flammable materials
before positioning the stove.
2. Next, place the bottom on the plinth, with the opening in the direction
wanted.
3. Lay the center stone on the three legs in the middle of the stove.
4. Place the rear stone so that it rests on the central stone, and equally
distributed over the two support points.
5. Now lay the last three side stones in place in the stove. Push the side
and rear stones together around the central stone.
6. Finally, add the top.
It is important to ensure that the top is not crooked, and that it rests
evenly on the whole of the lower part.