Table des Matières
Publicité
1550C/1555
Users Manual
Pushbuttons
Use the pushbuttons to control the Tester, view test results, and scroll through
chosen test results. Pushbuttons and their functionality are discussed in
Figure 2.
Item
8
800.561.8187
FUNCTION
1
2
3
Turns the Tester off and on.
Push
to go to the Function menu. Push again to exit the
Function menu. To scroll within the Function menu, use the arrow
pushbuttons.
Scrolls through test voltages, stored test results, timer duration, and
changes test tag ID characters. Also used to answer "yes" to yes/no
prompts.
After a memory location is set,
test results stored in memory. These include voltage, capacitance,
polarization index, dielectric absorption ratio, and current.
Use to scroll through test voltages, stored test results, timer
duration, and memory locations. Also used to answer "no" to yes/no
prompts.
Use for Test Voltage mode to start incrementally setting the test
voltage between 250 V and 10,000 V.
Starts and stops a test. Push and hold for 1 second to start a test.
Push again to stop a test.
Figure 3. Pushbuttons
www.
ENTER
4
5
6
Description
displays the test parameters,
.com
TEST
7
Ghh02.eps
information@itm.co
Publicité
Table des Matières
