Table des Matières
Publicité
Introduction
The Fluke 1550C and 1555 Insulation Testers (hereafter "the Tester") are high-
voltage insulation testers to validate general circuits, such as switchgear,
motors, and cables.
The Tester features:
•
•
•
•
•
•
•
•
•
•
•
•
•
The Tester meets EN 61557 Parts 1 and 2; and EN 61010-1, CAT IV 600 V
Pollution Degree 2 standards. CAT IV equipment is designed to protect against
transients from the primary supply level, such as an electricity meter or an
overhead or underground utility service.
800.561.8187
Large liquid crystal display (LCD)
Six preset test voltages: 250 V, 500 V, 1000 V, 2500 V, 5000 V, 10,000 V
(1555 only)
Programmable test voltages: 250 V to 10,000 V (50/100 V steps)
Resistance measurement: 200 kΩ to 2 TΩ
Polarization Index (PI)
Dielectric Absorption Ratio (DAR)
Ramp mode that linearly increases (100 V/s) the applied test voltage
Test timer and storage for test results with user-defined ID tag
Breakdown voltage indication
Rechargeable lead-acid battery
Auto shutoff after 30 minutes of inactivity
Infrared (IR) port for downloading test data
PC software (supplied)
www.
information@itm.co
.com
1
Publicité
Table des Matières
