Installation Requirements - FS IES3100-8TF Guide De Démarrage Rapide

LEDs Status
On
PWR
Off
On
SYSTEM Blinking
Off
RJ45 Green
On
SFP Blinking
Off

Installation Requirements

Before you begin the installation, make sure that you have the following:
Workstations running Windows XP/2003/Vista/7/8/10/2008, MAC OS X or later, Linux, UNIX, or
other platforms are compatible with TCP/IP protocols.
Workstations are installed with Ethernet NIC (Network Interface Card).
Serial Port Connection (Terminal)
The above Workstations come with COM Port (DB9) or USB-to-RS232 converter.
The above Workstations have been installed with terminal emulator, such as HyperTerminal
included in Windows XP/2003.
Serial cable -- one end is attached to the RS232 serial port, while the other ends to the RJ45
console port of the switch.
Ethernet Port Connection
Network cables -- Use standard network (UTP) cables with RJ45 connectors.
The above PC is installed with Web browser.
NOTE: It is recommended to use Internet Explorer 8.0 or above to access the switch. If the
web interface of the Industrial Managed Switch is not accessible, please turn off the
anti-virus software or firewall and then try it again.
4
Description
Power is being supplied to power input.
Power is not being supplied to power input.
The system is booting and not ready for operation.
The system is ready for operation.
No supply voltage or the system is not ready for operation.
On The port is active and links.
Blinking The port's data is being transmitted.
Off The port is inactive or link down.
The port is active and links.
The port's data is being transmitted.
The port is inactive or link down.