Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Mounting the Switch
DIN-rail Mounting
Mounting the unit
Releasing the unit
1. Position the unit in front of the DIN-Rail and hook the mount bracket over the top of the rail.
2. Rotate the switch downward towards the rail to lock it into place. You will know it is secure when
you hear the click.
3. To remove the unit, pull down to clear the bottom of the DIN-Rail and rotate away from the rail.
Grounding the Switch
Grounding and wire routing help conduct high voltage, static electricity and lightning strikes on the
casing to the ground, and help limit the effects of noise due to electromagnetic interference (EMI).
Run the ground connection from the ground screw to the grounding surface prior to connecting
devices.
18-60V
DC
PWR1
PWR2
5
Publicité
Table des Matières
