Component Out; Compatibility Of This Unit With Progressive-Scan Tvs; Av Connector Out - Pioneer NS-DV1000 Mode D'emploi

12 The Initial Settings menu

Component Out

(US model only)
• Default setting: Interlace
You only need to make this setting if you
connected this player to your TV using the
component video outputs.
Initial Settings
Digital Audio Mode
Video Output
Language
Display
Options
Speakers
If you have a progressive-scan compatible TV,
set this to Progressive for flicker-free video
output. If your TV is not compatible with
progressive-scan video, set to Interlace.
Check the operating instructions that came
with your TV if you're unsure about its
compatibility.
• If you make a setting here that is
incompatible with your TV, the TV may
not display any picture at all. If this
happens either switch everything off
and reconnect to the TV using either the
supplied video cable, or an S-Video
cable (see page 71 for more on this).
Compatibility of this unit with
progressive-scan TVs
This player is compatible with progressive
video Macro Vision System Copy Guard.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE
WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO
BE DISPLAYED IN THE PICTURE. IN CASE OF 525
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS
RECOMMENDED THAT THE USER SWITCH THE
CONNECTION TO THE "STANDARD DEFINITION"
OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR
TV SET COMPATIBILITY WITH THIS MODEL 525p DVD
PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE
60
CENTER.
En
TV Screen Progressive
Component Out Interlace
S-Video Out
Still Picture
• This player is compatible with the
following Pioneer displays and monitors:
PDP-5030HD, PRO-1000HD, PRO-
800HD, PDP-4330HD, PRO-720HD,
PRO-620HD, PRO-520HD, SD-643HDS,
SD-533HDS.

AV Connector Out

(European model only)
• Default setting: Video
You only need to make this setting if you
connected this player to your TV using the AV
SCART-type connector.
• If you make a setting here that is
incompatible with your TV, the TV may
not display any picture at all. If this
happens either switch everything off
and reconnect to the TV using either the
supplied video cable, or an S-Video
cable (see page 71 for more on this).
• SCART cables come in various configu-
rations. Make sure you use the correct
one for your TV/monitor. See page 81 for
the SCART pin assignment diagram
Initial Settings
Digital Audio Mode
TV Screen
Video Output
AV Connector Out
Language
S-Video Out
Display
Still Picture
Options
Speakers
• Video – Compatible with all TVs, but
lowest quality of the three AV settings.
• S-Video – Almost the same quality as
RGB, but can give better results if you
are using a long SCART cable.
• RGB – If your TV is compatible, this
setting gives the best picture quality.
Video
S-Video
RGB