Using The Room Setup Guide - Pioneer NS-DV1000 Mode D'emploi

03 Getting started
2 US only: Press ENTER to move on to
the next screen.
Welcome to Pioneer DVD!
Thank you for purchasing this Pioneer DVD player.
Before using, please take a little time
to setup your DVD player
Put the batteries into the remote control
Next, press the [ENTER] button on the remote control
and start the Let's Get Started Menu
3 Use the
buttons to select either 'Wide Screen
(16:9)' or 'Standard size screen (4:3)'
according to the kind of TV you have,
then press ENTER.
Let's Get Started Menu
4 Press ENTER again to finish setting up.
Let's Get Started Menu
• Select Back then press ENTER if you
want to go back and change the setting
you just made.
22
En
Next
(cursor left/right)
/
What kind of TV do you have?
Use the / cursor buttons
to choose, then press [ENTER]
Wide screen (16:9) Standard size screen (4:3)
Setup complete
If you're finished setting up,
choose [Complete],
to start again choose [Back]
Complete Back

Using the Room Setup guide

You can get good surround sound results
from your system very simply using this
quick Room Setup feature.
You can make more detailed settings later if
you need to. These are explained in Choosing
your surround sound settings (pages 46–48).
ENTER
ROOM SETUP
FL
SEAT POSITION
MC
RL
1 Press ROOM SETUP.
The display shows an animation.
2 Use the (cursor up/down)
/
buttons to select a room size.
• Large Room – more than 30 square
meters
• Middle Room – about 20 square meters
• Small Room – up to 13 square meters
3 Press ENTER.
FR
RR