Reverse Display Style; Child Lock; Recording Dvd-Audio Using The Rec Mode; Resetting The Unit - Pioneer NS-DV1000 Mode D'emploi

14 Additional information

Reverse display style

• Default setting: On
When this feature is set to On, the system will
periodically inverse the colors in the graphic
display. To switch this feature off, set to Off.
1 Switch the system into standby.
2 Press SYS MENU.
3 Use the
to select 'Reverse Display'.
4 Use the
to select 'On' or 'Off'.
5 Press ENTER to exit.

Child Lock

• Default setting: Off
This system has a child lock feature that makes
the front panel buttons inoperative. This is
useful when you've set the wake-up timer and
don't want the unit switched on before it
activates.
1 Switch the system into standby.
2 Press SYS MENU.
3 Use the
to select 'Child Lock'.
The current setting is shown in the display.
4 Use the
to select 'On' or 'Off'.
5 Press ENTER to exit.
78
En
/ (cursor left/right) buttons
(cursor up/down) buttons
/
/ (cursor left/right) buttons
(cursor up/down) buttons
/
Recording DVD-Audio using
the REC Mode
• Default setting: Off
When Rec Mode is On, a stereo downmix of
multi-channel DVD-A discs is output from the
speakers and from the analog audio jacks.
When set to Off, multi-channel DVD-A discs
are played through all the speakers, but nothing
is output from the analog audio jack.
Note that with some discs, only the front left/
right channels are output. Also, whether On or
Off, DVD-A audio is not output from the digital
audio jack.
1 Press 'CD DVD' to switch the system to
the CD/DVD function.
2 Press SYS MENU.
/
3 Use the (cursor left/right) buttons
to select 'REC Mode'.
/
4 Use the (cursor up/down) buttons
to select 'On' or 'Off'.
5 Press ENTER.

Resetting the unit

Use this procedure to reset all the player's
settings to the factory default.
1 Press TUNER.
Press and hold down the 7 (stop)
2
button on the front panel until you see the
message 'Memory Clear?' (about 8 seconds)
then release.
3 Within 3 seconds, press and hold down
the 7 (stop) button again for 3 seconds to
reset the system.
All the player's settings are now reset, and you
should see the 'Let's Get Started' screen.