Cleaning The Pickup Lens; Problems With Condensation; Moving The Unit; Power Cord Caution - Pioneer NS-DV1000 Mode D'emploi

Additional information

Cleaning the pickup lens

The DVD player's lens should not become dirty
in normal use, but if for some reason it should
malfunction due to dust or dirt, consult your
nearest Pioneer authorized service center.
Although lens cleaners for CD players are
commercially available, we do not recommend
using them since some may damage the lens.

Problems with condensation

Condensation may form inside the player if it is
brought into a warm room from outside, or if
the temperature of the room rises quickly.
Although the condensation won't damage the
player, it may temporarily impair its perform-
ance. For this reason you should leave it to
adjust to the warmer temperature for about an
hour before switching on and using.

Moving the unit

If you need to move the unit, first press
STANDBY/ON on the front panel to turn the
player off. Wait for See You to disappear from
the display, then unplug the power cord. Never
lift or move the unit during playback—discs
rotate at a high speed and may be damaged.
• Unplugging the unit before See You
completely disappears from the display
may cause the system to return to the
factory settings.

Power cord caution

Handle the power cord by the plug part. Do not
pull out the plug by tugging the cord, and never
touch the power cord when your hands are wet,
as this could cause a short circuit or electric
shock. Do not place the unit, a piece of
furniture, or other object on the power cord or
pinch the cord in any other way. Never make a
knot in the cord or tie it with other cords. The
power cords should be routed so that they are
not likely to be stepped on. A damaged power
cord can cause a fire or give you an electric
shock. Check the power cord once in a while. If
you find it damaged, ask your nearest Pioneer
authorized service center or your dealer for a
replacement.
SCART pin assignment
(European model only)
The diagram below shows the SCART 21-pin
connector assignment. This connector provides
the video and audio signals for connection to a
compatible colour TV or monitor.
PIN no. & Assignment
1 ... Audio R OUT
2 ... Audio R IN
3 ... Audio L OUT
4 ... GND (audio)
5 ... GND (video)
6 ... Audio L IN
7 ... B OUT
8 ... Status
9 ... GND (video)
10 .. No connection
11 .. G OUT
PIN no. & Assignment
12 .. No connection
13 .. GND (video)
14 .. GND (video)
15 .. R or C OUT
16 .. BLANK OUT
17 .. GND (video)
18 .. GND (video)
19 .. Video or Y OUT
20 .. No connection
21 .. GND (video)
14
81
En