Using The On-Screen Displays; Playing Discs; Basic Playback Controls - Pioneer XV-DV250 Mode D'emploi

Getting started

Using the on-screen displays

For ease of use, this system makes extensive
use of graphical on-screen displays (OSDs).
All the screens are navigated in basically the
same way, using the cursor buttons ( ,
) to change the highlighted item and
pressing ENTER to select it.
Important
• Throughout this manual, 'Select' means
use the cursor buttons to highlight an item
on-screen, then press ENTER.
Button What it does
HOME Displays/exits the on-screen display
MENU
Changes the highlighted menu item
ENTER
Selects the highlighted menu item
RETURN
Returns to the main menu without
saving changes
Tip
• The button guide at the bottom of every
OSD screen shows you which buttons
you'll need to use for that screen.

Playing discs

The basic playback controls for playing DVD,
CD, Video CD/Super VCD and MP3/WMA discs
are covered here. Further functions are
detailed in chapter 3.
1 If the player isn't already on, switch it on.
If you're playing a disc with video, also turn on
your TV and make sure that it is set to the
correct video input.
2 Press OPEN/CLOSE to load a disc.
Note
1 The screen saver will appear after five minutes of inactivity.
2 You may find with some DVD discs that some playback controls don't work in certain parts of the disc.
All manuals and user guides at all-guides.com
Load a disc with the label side facing up, using
the disc tray guide to align the disc (if you're
loading a double-sided DVD disc, load it with
the side you want to play face down).
, ,
1
3
If you're playing a DVD or Video CD/Super VCD,
a menu may appear. See DVD-Video disc
menus and Video CD/Super VCD PBC menus on
page 8 to navigate these.
If you're playing a WMA/MP3 disc, it may take
a few seconds before playing.
If you loaded a CD/CD-R/RW containing
JPEGs, a slideshow will start. See Playing a
JPEG slideshow on page 13 for more on this.
4
Use the VOLUME control.

Basic playback controls

The following table shows the basic controls on
the remote for playing discs
other playback features in the chapter 3.
Press (play) to start playback.
Adjust the volume.
Button What it does
Starts/resumes normal playback.
• If the display shows RESUME or
LAST MEM playback starts from the
resume or last memory point (see
Resume and Last Memory below).
Pauses/unpauses a disc.
Stops playback or cancels the resume
function (if the display shows RESUME ).
Press to start fast reverse scanning.
Press to start fast forward scanning.
01
2
. You can find
7
En