Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
28
5.0 FINISHING
EN
DO NOT STRIKE, SLAM OR SCRATCH GLASS. DO NOT OPERATE APPLIANCE WITH GLASS
5.1
HOUSING PANEL INSTALLATION
Secure the housing panels as illustrated using the 17 #8 X 3/8" screws supplied.
A.
- 4 screws secure the top housing panel.
- 3 screws secure the bottom housing panel.
- 5 screws secure each of the side housing panels.
5.2
DOOR REMOVAL / INSTALLATION
THE DOOR LATCHES ARE PART OF A SAFETY SYSTEM AND MUST BE PROPERLY ENGAGED. DO
FACING AND/OR FINISHING MATERIALS MUST NOT INTERFERE WITH AIR FLOW THROUGH AIR
OPENINGS, LOUVRES OPENINGS, OPERATION OF LOUVRES OR DOORS OR ACCESS FOR
SERVICE. OBSERVE ALL CLEARANCES WHEN APPLYING COMBUSTIBLE MATERIALS.
BEFORE DOOR IS REMOVED TURN THE APPLIANCE OFF AND WAIT UNTIL APPLIANCE IS COOL TO
Remove the surround. (see "SURROUND
A.
INSTALLATION/REMOVAL" section) then remove
the safety screen, (see, "SAFETY SCREEN
INSTALLATION/REMOVAL" section).
Remove the 3 screws that secure the door.
B.
Lift the door up and off.
C.
Reverse steps to reinstall the door, safety screen
D.
and surround.
NOTE: A barrier designed to reduce the risk of burns
from the hot viewing glass is provided with the appli-
ance and must be installed.
W415-1337 / 06.23.14
NEVER OBSTRUCT THE FRONT OPENING OF THE APPLIANCE.
REMOVED, CRACKED, BROKEN OR SCRATCHED.
1
2
GLASS MAY BE HOT, DO NOT TOUCH GLASS UNTIL COOLED.
NOT OPERATE THE APPLIANCE WITH LATCHES DISENGAGED.
THE TOUCH. DOORS ARE HEAVY AND FRAGILE SO HANDLE WITH CARE.
WARNING
!
RISK OF FIRE!
3
WARNING
!
72.4
4
75.1
Publicité
Chapitres
Table des Matières
Dépannage
