Mobile Home - Napoleon WHD31N Instructions D'installation Et D'opération

26
4.7

MOBILE HOME

This appliance is certifi ed to be installed as an OEM (Original Equipment Manufacturer)
EN
installation in a manufactured home or mobile home and must be installed in accordance with the
manufacturer's instructions and the Manufactured Home Construction and Safety Standard, Title
24 CFR, Part 3280, or, when such a standard is not applicable, the Standard for Manufactured Home
Installations, ANSI/NCSBCS A225.1 in the United States or the Mobile Home Standard, CAN/CSA
Z240 MH Series, in Canada. This appliance is only for use with the type(s) of gas indicated on the
rating plate. A conversion kit is supplied with the mobile home appliance.
This Mobile/Manufactured Home Listed appliance comes factory equipped with a means to secure the unit. For
mobile home installations, the appliance must be fastened in place. It is recommended that the appliance be
secured in all installations. Always turn off the pilot and the fuel supply at the source, prior to moving the mobile
home. After moving the mobile home and prior to lighting the appliance, ensure that the media placed on the burner
(ie. logs, glass etc.) is positioned correctly.
This appliance is certifi ed to be installed in an aftermarket permanently located, manufactured
(mobile) home, where not prohibited by local codes.
This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not
convertible for use with other gases, unless a certifi ed kit is used.
Conversion Kits
This appliance is fi eld convertible between Natural Gas (NG) and Propane (LP).
To convert from one gas to another consult your Authorized dealer/distributor.
W415-1337 / 06.23.14
29.3A