Zip HydroTap® G4 BCS160/175
5. Using the Tap
EN
Boiling water lever
Boiling, chilled,
sparkling water
SELECT
SAFETY
Zip lever
Note: If the drinking water system has not been used for several days, allow the
tap to run cold water for about five minutes.
Operation
Classic
Cold water lever
Press the red lever to dispense boiling water. Pull the lever up to dispense boiling
water continually. The water will flow for 5 to 15 seconds. This time can be set in the
menu. The lever then has to be manually returned to the Off position.
Press the blue lever to dispense chilled water. Pull the lever up to dispense chilled
water continually. The water will flow for 5 to 15 seconds. This time can be set in the
menu. The lever then has to be manually returned to the Off position.
Press the red and blue levers simultaneously to dispense sparkling water with carbon
dioxide added. Pull the levers up to dispense sparkling water continually. The water
will flow for 5 to 15 seconds. This time can be set in the menu. The levers then have to
be manually returned to the Off position.
Arc / Celsius Arc
Select the desired type of water by tipping to on the Select button on the ZIP lever at
the tap.
• Red: boiling water
• Blue: chilled water
White filter LED
• White: sparkling water
Turn the lever to dispense water. When the lever is turned back, water will flow as
long as the lever is held. If the lever is turned forwards, water will flow continually for
5 to 15 seconds. This time can be set in the menu. The lever then has to be manually
returned to the Off position.
Note: When dispensing water at the Celsius Arc tap, pay attention to the orienta-
Mains water
tion of the swivel spout.
Dispense mains water (Celsius Arc)
To dispense mains water, use the mixing lever of the tap.
Pull the lever to the side to open the valve.
Rotate forward or back to dispense cold, warm or mixed mains water.
Note: When dispensing water, pay attention to the orientation of the swivel
spout.
Red light
• On all the time: boiling water is ready and can be dispensed.
• Flashing: the water has not yet been heated to the set temperature.
Blue light
• On all the time: temperature of chilled water is at the set temperature.
Mixing lever
• Flashing: the water has not yet been chilled to the set temperature.
White light (Arc / Celsius Arc)
• On all the time: temperature of sparkling water is at the set temperature.
• Flashing: the water has not yet been chilled to the set temperature.
White filter LED (Classic)
• Flashing: the filter needs to be replaced. This LED starts flashing according to filter
use and the filter capacity set in the menu.
Note: For the taps Arc and Celsius Arc the need for a filter replacement is indi-
cated by cyclically flashing all the LEDs in all three colours
32