Lighting And Stoking - RAIS X-Basic Manuel D'utilisation

US English User Manual RAIS X-Basic, RAIS X-Front & RAIS X-Board

Lighting and Stoking

40
To light the stove, use alcohol briquettes or similar,
as well as approx. 2 kg of firewood, split into kindling
sticks. Set the air damper to the fully open position 3.
Be carefull not to place the firewood too close to the
opening and glass.
TIPS before firing up:
Open a door or window close to the wood burning
stove.
If there is a "storm" in the stove coming from the
chimney, it is advisable to place a screwed-up piece
of newspaper between the upper baffle plate and
the chimney, set the paper on fire, and wait until you
hear a "rumbling" noise in the chimney. This means
that there definitely is a draught in the chimney and
you avoid smoke in the room.
Light the fire and shut the
door, leaving an open gap
of approx. ½ - 1".
NOTE: Do not leave the
stove unattended while the
door is ajar.