User Manual
Lighting and fuelling
PLEASE NOTE!
If the air system is connected, the valve must remain open
".Top-down" lighting
• Start by placing 3-4 pieces of chopped wood - approx. 1 ½-2 kg in the bottom of
the combustion chamber.
on top, and 2-3 fuel tablets or similar (1).
Adjust the air damper so that it is completely open, i.e. position 3.
• The fire is lit and the door is closed ajar (2-3).
PLEASE NOTE! It is important to have a quick lighting of the wood.
• When the fire has caught the kindling wood, shut the door completely (after ap-
prox. 10-15 minutes, depending on the draft conditions in the chimney.
air dampers.
• When the last flame is extinguished and there is a good layer of embers (5),
add 2-3 pieces of wood - approx. 1½ kg wood (6).
• Close the door ajar, and when the fire has taken hold, close the door complete-
ly.
• After approximately 5 min - or until clear and stable flames appear (6) - close
the damper gradually (see "adjusting the air control").
VIVA L USA - US English
Place approx. 1kg of dry wood, chopped to pieces,
The damper is set to position 2 - see adjustment of
24