RAIS X-Basic Manuel D'utilisation page 19

US English User Manual RAIS X-Basic, RAIS X-Front & RAIS X-Board
1. Unpack the stove carefully without damaging the paint. The stove is delivered with its
panels mounted and adjusted. The front panel is packed
seperately
2. A smoke connector is placed in the burning chamber.
The top cover to be taken of using gloves. It is heavy in the
front and two persons is recommended.
3. Backside panel and
side panels to be taken
off using gloves.
Loosen the upper nuts.
Lift up the parts and carefully remove these.
5. Transport straps and wood pieces to be removed.
6. The stove body is
moved to the aft af the
pallet. A suitable covered
sack truck may be is used
for lifting the stove of the
pallet. The stove may only
be lifted from the back
side.
7. The stove stove is placed on pieces of carpet or other
suitable material and pushed to its correct position (dam-
age to floor material is not RAIS responcibility).
19