Installation Of Wood Staorage Box - X-Board - RAIS X-Basic Manuel D'utilisation

US English User Manual RAIS X-Basic, RAIS X-Front & RAIS X-Board
Installation of WOOD STOAGE BOX - X-Board
Necessary tools:
Combination wrenches No 8
Allen wrench
1 wood storage box
1 top plate of steel for wood storage box
(separate box)
1 bottom plate of steel for wood storage
box (separate box)
1 reflector plate
1 set of screws
4 allen screw M10 for alignment
2 allen screws M5
2 nuts M5
4 washers
4 alignment feet (installed on the wood
storage box)
Important installation advice.
Use the gloves delivered with the stove.
1. Install the wood storage box on the side of the stove. Align the wood storage box by the
four adjustable feet (4) acc to the back side panel of the stove.
2. Install the reflector plate with the allen screws in the convection air channel (det. B).
3. Put the panels on the stove and align the top plate with the bolts (6)
4. Install the 4 pcs M10 alignment bolts (5). It is now possible to adjust top plate (2) of the
wood storage box by these 4 bolts.
5. Finally put the bottom plate (3) in the wood storage box.
26